ErgoQuest™  Motorized Monitor Positioning System (EQ-MMPS) with 48“ mounting track , 3 sliding transits, and 3 LCD mounts with horizontal and vertical pivots.  Central actuator moves the mounting track forward and backward through a range of 12“.  When used in combination with tilting monitor platform, entire positioning system rotates forward and backward through a range of 55 degrees.  Fixed-mount keypad control.  Optional remote control with memory presets.  Black finish.  

The ErgoQuest Clamp-Mount Flap-Panel Arm (EQ-CMFA-1) uses a clamp mount to attach to the workstation tabletop edge.  Both 75mm and 100mm VESA standard mounting plates are included.  Beige finish.

The ErgoQuest Bolt-Mount Flat-Panel Arm 1 (EQ-BMFA-BM) attaches to the tilting monitor platform to provide the monitor tilt function to flat panel monitors.  Both 75mm and 100mm VESA standard mounting plates are included.  Beige finish.

ErgoQuest™ Clamp-Mount Flat-Panel Arm 3 (EQ-CMFA-3) accepts VESA mounting standard LCD monitors, Adjustable counter balance allows monitor to "float",  Ideal for office, school, industrial, or display use,  Comes with all mounting hardware,   Arm Length: 22",  Neutral gray color.

ErgoQuest™ Clamp-Mount Flat-Panel Arm 4 (EQ-CMFA-4)  adds four powered USB ports up to the desktop without adding another separate. Includes heavy-duty mounting hardware, light-up USB cable and AC adapter to power USB hub.  Compatible with 75mm/100mm VESA interfaces,   70-degree top hinge, 180-degree bottom hinge,  11" max. horizontal extension.

ErgoQuest™ Weighted Base-Mount Flat-Panel Arm 1 (EQ-WBFA-1) has VESA mounting standard LCD monitor mounting bracket, adjustable counter balance allows monitor to "float",  Ideal for office, school, industrial, or display use,  Comes with all mounting hardware,   Arm Length: 22",  Neutral gray color.

ErgoQuest™  Articulating Aluminum Flat-Panel Arm (EQ-AAFA-1) has an adjustable pneumatic spring allowing the monitor to move easily but stays firmly in place once positioned.  This arm allows for 24“ maximum horizontal extension and will hold monitors up to 17.5 pounds.  Mounting hardware is included.

ErgoQuest™  Quad Flat-Panel Mount supports 4 monitors side by side.  Distance between monitors measures 18“.  Articulating VESA compatible mounts are included.  Black finish.

ErgoQuest ErgoQuest™ Triple Flat-Panel Mount (EQ-TFPM) supports 3 monitors side by side.  Distance between monitors is adjustable“.  Articulating VESA compatible mounts are included.  Black finish.  

ErgoQuest™  Dual Flat-Panel Mount supports 2 monitors side by side.  Distance between monitors measures 18“.  Articulating VESA compatible mounts are included.  Black finish.

ErgoQuest™ Positive Tilt Keyboard Mechanism (EQ-PTKM-1)  tilts the keyboard and mouse through 60 degree range (+/- 30 degrees) providing a comfortable angle for sitting, standing, and reclining positions.  ergonomic efficiency which reduces risk of repetitive stress injuries like carpal tunnel syndrome.  Adjustments are made with a single lever. Adjusts to accept keyboards up to 9" measured from front edge to back.  Mousepad support attaches to right or left and has a cable guide to prevent dropping mouse. Steel construction with black finish.  

ErgoQuest™ Adjustable, Articulating, Laptop Tray (EQ-AALT-1) with optional mouse pad provides stable support for laptop computers and positions them at angles up to 30 degrees. The included mouse tray can be easily added and removed as needed. The EQ-AALT can also be used as a keyboard tray.  The EQ-AALT uses the same articulating mechanism as the EQ-PTKM-1.  Black acrylic and metal finish. 

ErgoQuest™ Adjustable, Articulating, Laptop Tray Combo (EQ-AALT-2) has the same features as the EQ-AALT-1, but also includes a standard keyboard platform that can be swapped out with the laptop platform.  An optional mouse pad provides stable support for laptop computers and positions them at angles up to 30 degrees. The included mouse tray can be easily added and removed as needed. Black acrylic and metal finish.  

ErgoQuest™  Extended Length Keyboard Arm (EQ-EKAT-1) is like the EQ-PTKM-1 but  adds 6“ to 18“ of additional extension to the keyboard arm.  Black finish.

ErgoQuest™ Wrap-Around Keyboard and Mouse Tray (EQ-WAKT) wraps around the body, providing support for the elbows and forearms while keyboarding and mousing.  The mechanism provides height adjustment and +/- 30 degrees tilt.   The EQ-WAKT-1 uses the same articulating mechanism as the EQ-PTKM-1.  Constructed out of light-weight 1/2" thick Sintra (TM).  Black finish.

ErgoQuest™  Ultra Narrow Keyboard Tray (EQ-UNKT-1) measures only 7“ in width and is designed to accommodate mini keyboard trays.  Spring-loaded sleeves keep the keyboard securely in place.  Storage tray is optional.  Often used in conjunction with the EQ- ATMP-1 and the EQ-MTSE-1.  Black finish. 

ErgoQuest™ Articulating Frame-Mounted Platform (EQ-AFMP-1) with steel mounting clamp, steel arm, steel tray base, and 13” x 21” acrylic tray with 1” lip.  Tray rotates 360 degrees and tilts +/- 15 degrees.  Entire platform rotates 270 degrees about its clamp mount.  Mounting hardware is included.  Black finish.

ErgoQuest™ Articulating, Table-Mounted Platform (EQ-ATMP-1) with 10” ball bearing track mount, steel arm, and multiple pivot points.  Track mount provides forward and backward movement through 10”.  Heavy duty joints at both ends of arm provide 180 degrees horizontal pivot, 180 degrees vertical pivot, and 270 degrees rotation.  Platform 3/8“ black acrylic with padded wrist rest.  Black finish.

ErgoQuest™ Base-Mounted Battery Pack (EQ-BMBP-1) with steel mounting tray, on/off switch, and battery charger.  The 12 volt mobile power source provides continuous power for both table and computer operation.  Black plastic finish.

ErgoQuest™  Lamp Mount Cup Holder (EQ-CMCH-1) has two adjustable diameter cup holders and one storage pocket for misc. items. The EQ-CHC-1 clamps to any table surface or the EQ-AFMP-1 (as shown). Black finish.

ErgoQuest™ Low-Rise Caster Kit (EQ-LRCK-1) works with the Model 200 ”H“-shaped base to provide a low clearance alternative to the standard 5.25“ clearance requirement.  Accommodates low clearance conditions often found with electric hospital beds.  Reduces total clearance of ”H“-shaped base to 2.75“.   Black finish.

ErgoQuest™ Adjustable Rack-Mounted Side Table (EQ-ARST-1) measures 16" x 20" and mounts at a height range of 12“ to 22" below the work surface height.  Accommodates a laptop, printer, scanner, or other peripherals.  Black acrylic finish.

ErgoQuest™ Frame-Mounted Halogen Up-Light (EQ-FMHU) with 150 watt halogen bulb provides a complete range of ambient illumination levels to suit every lighting preference.   Dimmable, with remote control (included).  Black finish.

  ErgoQuest™ Flexible Arm Low Voltage Task Light (EQ-FLTL-1) features a 20“ flexible arm with MR16 bulb that clamps to a 24“ long fixed arm with 2“ pipe clamp.  Includes remote control on/off switch.  Black finish.

ErgoQuest™ Programmable Infrared Remote Control (EQ-PIRC-1) has 4 memory pre-sets and consists of an IR-receiver and IR-transmitter  and represents a wireless alternative to the standard desk handsets. Table height can be adjusted from a distance. Channel set-up ensures that it can be used in open-plan offices as well. When the EQ-BIRC-1 is connected with the motor-control it automatically adjusts itself to it and is ready for operation immediately.  Black finish.  

ErgoQuest™ Programmable Infrared Remote Control (EQ-PIRC-2) has 16 memory positions and consists of an IR-receiver and IR-transmitter  and represents a wireless alternative to the standard desk handsets. Table height can be adjusted from a distance. Channel set-up ensures that it can be used in open-plan offices as well. When the EQ-BIRC-1 is connected with the motor-control it automatically adjusts itself to it and is ready for operation immediately.  Black finish.

ErgoQuest™ CPU Holder (EQ-CPUH-1) is  onstructed of rust-proof, powder-coated steel, the brackets adjust to fit virtually any size tower case or can be used to conveniently mount a desktop case on it's side. Anti-scuff, anti-skid foam pads are included to protect the computer case and prevent it from sliding out of the bracket.  Screws securely to desk, arm can be raised or lowered, accommodates different size cases, no additional tools required to assemble, adjusts to fit cases from 5 1/4" to 9 1/4" inches wide and from 15 3/8" to 21 inches high.  Black metal finish.

ErgoQuest™ CPU Holder 2 (EQ-CPU-2)  moves forward and back on ball bearing sliders, through range of 10".   Its 66-inch high-tensile webbing straps adjust to fit cases of nearly any shape with circumferences up to 57.5 inches and weighing as much as 44 pounds.  At 8" wide it will hold a case 20.75" tall,  it fits nearly any shaped case (even cubes & horizontal cases), sturdy steel construction with a tough wrinkle finish.

ErgoQuest™ Clamp-Mount Mouse Tray (EQ-CMMT-1)  is a unique, fully adjustable under desk mouse platform with wrist rest. Solid steel bracket clamps to the desktop. Sturdy steel construction, large mousing surface, comfortable, fully adjustable wrist rest, clamps easily to desk surface - no tools required,  clamp can be adjusted to 4".  Black finish.

Arm-Mounted Mouse Tray (EQ-AMMT-1)  attaches to the arm of most zero-gravity recliners and accommodates the natural position of the hand as the arm and elbow rest on the armrest. This position relieves pressure on the arm and shoulder. Black ABS plastic finish.  Includes a mouse pad and 4 standard cable ties. 

Arm-Mounted Mouse (EQ-AMMT-2)  adjusts in 5 degree increments to the wrist's "Natural At Rest Angle", (Approx. 20º to 30º off palm down and 10º down angle). It can be tilted down, angled right or left, and shifted to the right or left to achieve the exact position that is most comfortable to you.  It attaches with Velcro straps to the arm of any zero-gravity recliner. The universal mount system will not damage the chair or arm.  The edges of the SMMT-2 prevent the mouse from sliding off the platform, and yet is low enough to not restrict movement.  Black ABS finish.

ErgoQuest™ Mouse Tray Shelf Extension (EQ-MTSE-1) attaches to the EQ-ATMP-1 to provide a primary or secondary mousing surface.  Often used in combination with the EQ-UNKT-1   Black finish.

ErgoQuest™ USB to PS/2 Converter Cable 1 (EQ-UPCC-1): USB Type A male Connector 2: Mini DIN6 (AKA: PS/2) Common Uses: Connect a PS/2 mouse OR keyboard to a USB Type A. Port Length: 1ft. Notes: Molded stress relief cable.  Use with EQ-MPKB-1 to make compatible with USB.

ErgoQuest™ Mini PS2 Keyboard (EQ-MPKB-1) has all the features of a full-sized keyboard, but at half the size. This mini Windows-compatible keyboard is smooth operating and solid to the touch thanks to full sized keys and a keyboard design that provides tactile feedback.  Full size keys with embedded 10-key pad, soft touch, half stroke keys with tactile feedback,  Measures 5-3/4"L x 11"W x 1"H.  Use with EQ-UPC-1 to accommodate a USB interface.

ErgoQuest™ On-Screen Keypad Interface (EQ-OSKI-1) is puts the function of the keypad control on the computer screen.  Allows users to control the table height and monitor tilt on screen.  Different handset types can be set depending on the motor-control used. The software can be operated with a mouse and/or keyboard.  Users can create their own graphical user interface.  Requires the EQ-SICC-1 to function.

ErgoQuest™  Serial Interface Connector Cable (EQ-SICC-1) allows the users computer to control all motor functions.  Will allow simultaneous connection with standard keypad.  Works with the EQ-OSKI-1 to put the function of the keypad control on the computer screen and allow users to control the table height and monitor tilt on screen.

ErgoQuest™  USB Interface Connector Cable (EQ-UICC-1) allows the users computer to control all motor functions.  Works with the EQ-OSKI-1 to put the function of the keypad control on the computer screen and allow users to control the table height and monitor tilt on screen.

ErgoQuest™ Recliner Reinforcement Gusset Plate (EQ-RRGP-1) reinforces the strength of wood joints on the PC-6, PC-095, and PC-097.  Typically used when user weight approaches recliner weight limit.  3/16“ steel plate with allen screws.  Black finish.

ErgoQuest™ Motorized Recline Power Inverter (EQ-MRPI-1) converts battery power from the EQ-MMRP-1 to AC current to power the motorized recline feature on selected zero-gravity recliners.   Eliminates the need to plug the recliner into the wall outlet.  Silver aluminum finish.  Mounts to the EQ-MMRP-1 control box.

ErgoQuest™ Oversize Button Keypad (EQ-OBKP-1) replaces the standard keypad with 2.5 inch diameter buttons for easy access and control.  Mounts to work surface, keyboard tray, or optional flexible arm.  Black annodized finish.

ErgoQuest™ Oversize Reinforced CPU Rack (EQ-ORCR-1) is designed to accommodate oversize, heavy CPUs.  The  EQ-ORCR-1) features solid steel construction, welded joints and adjustable security strap.  Accommodates CPUs up to 27“ tall and 10“ wide.  Black finish.

ErgoQuest™ Accessory Convenience Handle Grip (EQ-ACHG-1) provides a secure handle grip for moving and positioning the workstation by hand.  Chrome finish with rubber grip.